Chimhowu, A. O., Hulme, D. & Munro, L. T. The ‘New’national development planning and global development goals: Processes and partnerships. World Dev. 120, 76–89. https://doi.org/10.1016/j.worlddev.2019.03.013 (2019).
Ridzuan, N., Subramanie, P., Elarbe, B., Elganidi, I. & Kumar, S. IOP Conference Series: Materials Science and Engineering 022116 (IOP Publishing, 2020).
Ghotbi Ravandi, E., Rahmannejad, R., Karimi-Nasab, S. & Sarrafi, A. Application of numerical modelling and genetic programming in hydrocarbon seepage prediction and control for crude oil storage unlined rock caverns. Geofluids https://doi.org/10.1155/2017/6803294 (2017).
Chen, J., Zhang, J. & Li, H. Determining the wax content of crude oils by using differential scanning calorimetry. Thermochim. Acta 410, 23–26. https://doi.org/10.1016/S0040-6031(03)00367-8 (2004).
Venkatesan, R. et al. The effect of asphaltenes on the gelation of waxy oils. Energy Fuels 17, 1630–1640. https://doi.org/10.1021/ef034013k (2003).
Hosseinipour, A., Sabil, K. M., Arya Ekaputra, A., Japper, A. B. & Ismail, L. B. The impact of the composition of the crude oils on the wax crystallization. Appl. Mech. Mater. 625, 196–200. https://doi.org/10.4028/www.scientific.net/AMM.625.196 (2014).
Valinejad, R. & Nazar, A. R. S. An experimental design approach for investigating the effects of operating factors on the wax deposition in pipelines. Fuel 106, 843–850. https://doi.org/10.1016/j.fuel.2012.11.080 (2013).
Jennings, D. W. & Breitigam, J. Paraffin inhibitor formulations for different application environments: From heated injection in the desert to extreme cold arctic temperatures. Energy Fuels 24, 2337–2349. https://doi.org/10.1021/ef900972u (2010).
Towler, B., Jaripatke, O. & Mokhatab, S. Experimental investigations of the mitigation of paraffin wax deposition in crude oil using chemical additives. Petrol. Sci. Technol. 29, 468–483. https://doi.org/10.1080/10916460903394029 (2011).
Yao, B. et al. Advances in and perspectives on strategies for improving the flowability of waxy oils. Energy Fuels 36, 7987–8025. https://doi.org/10.1021/acs.energyfuels.2c01295 (2022).
Machado, A. L., Lucas, E. F. & González, G. Poly (ethylene-co-vinyl acetate)(EVA) as wax inhibitor of a Brazilian crude oil: Oil viscosity, pour point and phase behavior of organic solutions. J. Petrol. Sci. Eng. 32, 159–165. https://doi.org/10.1016/S0920-4105(01)00158-9 (2001).
Yang, F., Zhao, Y., Sjöblom, J., Li, C. & Paso, K. G. Polymeric wax inhibitors and pour point depressants for waxy crude oils: A critical review. J. Dispers. Sci. Technol. 36, 213–225. https://doi.org/10.1080/01932691.2014.901917 (2015).
Alves, B. F., Pereira, P. H., Rita de Cássia, P. N. & Lucas, E. F. Influence of solvent solubility parameter on the performance of EVA copolymers as pour point modifiers of waxy model-systems. Fuel 258, 116196. https://doi.org/10.1016/j.fuel.2019.116196 (2019).
Yao, B. et al. Performance improvement of the ethylene-vinyl acetate copolymer (EVA) pour point depressant by small dosage of the amino-functionalized polymethylsilsesquioxane (PAMSQ) microsphere. Fuel 220, 167–176. https://doi.org/10.1016/j.fuel.2018.01.032 (2018).
Yang, F. et al. Performance improvement of the ethylene-vinyl acetate copolymer (EVA) pour point depressant by small dosages of the polymethylsilsesquioxane (PMSQ) microsphere: An experimental study. Fuel 207, 204–213. https://doi.org/10.1016/j.fuel.2017.06.083 (2017).
Yang, S. et al. Effect of polyethylene-vinyl acetate pour point depressants on the flow behavior of degassed changqing waxy crude oil before/after scCO2 extraction. Energy Fuels 33, 4931–4938.
Read More: Gamma radiation-induced grafting of poly(butyl acrylate) onto ethylene vinyl